Delivery today -- Any advice?

My new Handibot is being delivered today! Any tips or advice from anyone that learned anything the "hard way" when you received your new machine?

Just two things. 1) follow the directions that are in the top of the box to the letter. and 2) have some time set aside to play.

When you run the z-zero routine for the first time (from the fire-up app after you do the test cut) make sure that you've got a good connection! Touch the clip to the flip out plate and look for input #1 (on the position readout) to light up. Clip it to the bit and not the collet! I've found that the oxide coating on the collet is not a consistent conductor.