Good day, I was hoping to get some direction as to what is involved in applying autoleveling g-code such as applied to 3D printers here to our Handibot control software, is the FabMo-Leveler a step towards this? It would be great to reliably use the Handibot for large scale engraving projects and i think this would have a high benefit to cost value. Thank you in advance, Ahmed.by elalfy296 - Handibot App Developers Forum
Hello, I would appreciate some advice as to why the cut seems staggered in the model. Cutting around 16,000 rpm 1 inch per second 0.093 inch thick lexan. The overall dimensions are correct but it seems as though the border which is on a separate layer from the calligraphy in the center is staggered such that it interferes with the calligraphy on layer one. I don't notice any abnormalby elalfy296 - Handibot Forum
I plan on using this: if anyone sees a red flag, please waive it at me before i begin this endeavour.by elalfy296 - Handibot Forum
Great! Thanks and keep doing what y'all be doing!by elalfy296 - Handibot Forum
Thanks for the quick and thorough response Brian, i appreciate it. Will future version of the bot have either adjustable axes or auto leveling like for the repraps ?by elalfy296 - Handibot Forum
Here's what i've done and found so far: - Baseplate is square (image attached) - Carriage was binding a little (difficult to move by hand from X (4) to end - Adjusted the drive mechanism for X-only based on this: and it no longer binds - Checked Z-zero at a few different points (image attached): carriage does not move coplaner to the X-Y plane and is about 0.035" off from X,by elalfy296 - Handibot Forum
Thanks for the feedback. The unit was never operated before. I'm interested in the shims and more interested in a reliable solution. If there is any progress on the magnetic option, please let me know. The text is running along the X-axis and though i thought i checked the levelness of the workpiece and how flush the base mates to the workpiece, i'll be sure to look at it again.by elalfy296 - Handibot Forum
Hello, I had a few questions that i was hoping someone could assist me with please: Firstly: Last night i was zero-ing the Handibot when the motors stalled at (Y,0). I quickly shut the unit off and discovered the carriage wasn't engaging the limit switch. There are 2 screws holding the limit switch in place and their heads are very easily stripped. Loosening these did not give much adjusby elalfy296 - Handibot Forum