Mark Evans Wrote: ------------------------------------------------------- > > 1) is like to be able to establish a park > position > > at x=0, Y=6 (or so). It may be possible, but I > > haven't found it yet. If so, call it user error > > and skip to the next item. I'd like to have a > set > > park location to maximize workflow and have > aby Steve K - Handibot Forum
It has a few joggles on there, but I smoothed most out to almost unnoticeable. The problem with building anything is the builder always sees the errors, even when there aren't any. The clock is pretty large at almost a meter across. I did cut the 12 border pieces out with the HandiBot, too. I used VCarve Pro to draw the entire layout, then drew the border. Once done, I made overlapping 69 deby Steve K - Handibot Forum
All, I'm new and have had the HandiBot v2 for about three months or so. Things I've learned are vast and probably noob issues if anything. Some of the small issues I'm running into worth noting (to me) are: 1) is like to be able to establish a park position at x=0, Y=6 (or so). It may be possible, but I haven't found it yet. If so, call it user error and skip to theby Steve K - Handibot Forum
Mark, I'm in Columbus, Georgia. If you're close by, I wouldn't mind sharing some ideas and tricks. I've only have the HandiBot for a few months, but I'm getting better with each project. I'd also be willing to demonstrate for anyone in SW Georgia. Steveby Steve K - Handibot Forum
Uploaded the image to Dropbox. Maybe it'll work now. I drew the 48" jigs in SketchUp (version 7) and exported them to a .dxf file. Sent them to our local machine shop. 1/4" aluminum was quoted at $100 for each template. I ordered one base and two 8" x 48" jigs. I couldn't afford 1/2", so that's unfortunate. I should have them in by Weby Steve K - Handibot Forum
I have cut a 39" diameter clock with the indexing jigs on tongue and groove pine flooring scrap. It worked well enough but there seems to be induced "slop" - user error in my opinion. I have been battling the looseness of the indexing jigs the farther I go from 0, 0. My friend and I are going to make a set of 48" long aluminum indexing jigs. Our thoughts are to eliminate theby Steve K - Handibot Forum