right now it does not connect to my router, nor can I connect to it directly so I can"t reach the updater It acts like it is still connected to a wireless lan, but there is only one network it can join and that router doesn't show it as connected. if you could send a replacement card I would appreciate it. Russby Russ Miller - Handibot Forum
Thanks Brian. The Tool Finder did not find the Handibot on my local wifi networks. Also pushing and holding the green button did not result in a fabmo wifi broadcast.by Russ Miller - Handibot Forum
After a recent software update I was unable to switch back to AP mode. The Handibot is also no longer connected to the wifi used for the update, so I tried to reset via the small black button near the Edison board. This has been unsuccessful so far. ( I unplugged the main power cord, disconnected the USB on top of the Edison board to get access to the reset button, which I pressed and helby Russ Miller - Handibot Forum
Brian, That resetting method worked fine and I completed the software update. I have the rotary axis connected to the accessory port. What I want to do is command the rotary axis to rotate a rectangular block to index so I can machine two opposite sides of a model. ( Autodesk tutorials for using Fusion360 to cut out a F1-in-schools car body. ) I notice that Fusion360 includes a genericby Russ Miller - Handibot Forum
Brian, I have tried this procedure but the wifi connection to the Handibot never appears. I have tried it for much longer than 10 seconds to make sure, but no luck. The blue light on the plug in circuit card flashes about every 4 seconds after I release the green button, but no wifi. thanks for your help Russby Russ Miller - Handibot Forum
I have been able to connect to the Handibot 2.0, use fabmo, and run the test carving just fine.. THEN I began having the same problems at Steve... could connect to fabmo's wifi but could not access fabmo. i tried successfully to log on to port 81, but could not connect to a discovered wifi network. after that failure the Handibot no longer transmits any WIFI signal. nothing to conneby Russ Miller - Handibot Forum