Accessory Base with Handibot z-clearance October 09, 2016 03:12PM | Posts: 45 |
Re: Accessory Base with Handibot z-clearance October 09, 2016 08:38PM | Posts: 453 |
Re: Accessory Base with Handibot z-clearance October 11, 2016 02:04PM | Posts: 45 |
Re: Accessory Base with Handibot z-clearance October 11, 2016 06:20PM | Admin Posts: 622 |
Re: Accessory Base with Handibot z-clearance October 16, 2016 03:01PM | Posts: 45 |
Re: Accessory Base with Handibot z-clearance October 17, 2016 09:59AM | Posts: 45 |
Re: Accessory Base with Handibot z-clearance October 17, 2016 10:33AM | Admin Posts: 622 |
Re: Accessory Base with Handibot z-clearance October 17, 2016 01:55PM | Posts: 45 |
'Rounding Toolpath 'File created: Sunday October 16 2016 - 02:52 PM 'For ShopBot Control: SB3 Alpha from Vectric ' 'UNITS:Inches ' 'Set router RPM to 12000 PAUSE ' ' 'Turning router ON SO,1,1 PAUSE,2 ' VD,,5 &Diameter=1.5000 &FeedRate=1.7 &RotationalFeedRate=&Feedrate/(&Diameter*3.14159/360) MS,1.7,0.5 VS,,,,&RotationalFeedRate JZ,0.5107 J5,,0.0000,,,0.0000 J5,,0.0000,0.5107,,51.5925 M5,,0.0000,0.2071,,51.5925 M5,,5.0000,0.2071,,51.5925 M5,,5.0000,0.2071,,50.1275
Re: Accessory Base with Handibot z-clearance October 17, 2016 02:31PM | Admin Posts: 622 |
Re: Accessory Base with Handibot z-clearance October 17, 2016 03:29PM | Posts: 45 |
Re: Accessory Base with Handibot z-clearance October 17, 2016 04:12PM | Admin Posts: 622 |