Go Back to handibot.com
sign up or log-in

Advanced

FabMo WiFi Name and Password reset

Posted by TomboySawyer 
FabMo WiFi Name and Password reset
October 23, 2019 03:26PM
I purchased a used Adventure Edition 2.0 last year via an intermediary (not from the prior user).

I finally got the space to set this up and use it and when I got to look at my Wifi, the machine appears as Hand-O-Bot and does not use the FabMo wifi password.

Can someone tell me how to reset the machine's wifi to the original condition in order to access it?
Re: FabMo WiFi Name and Password reset
October 31, 2019 10:39AM
Are you able to connect to the wifi -- but just unable to log into the interface?
When connected to the tool -- you can access the back-end by adding ":81" after the IP of your tool ... so for example, in AP connection, the IP is always 192.168.42.1 -- and you would go to 192.168.42.1:81 to access the back-end menu. One of the options here is a "factory reset" which will restore all factory settings for your handibot.
Re: FabMo WiFi Name and Password reset
November 06, 2019 06:24PM
Brian Owen, ShopBot Wrote:
-------------------------------------------------------
> Are you able to connect to the wifi -- but just un
> able to log into the interface?

I can see the device as a wifi choice, but the previous owner renamed it "hand-o-bot" and trying to connect to it, it asks for a password.
This leads me to believe that I am not able to connect to the wifi.

> When connected to the tool -- you can access the b
> ack-end by adding ":81" after the IP of your tool
> ... so for example, in AP connection, the IP is al
> ways 192.168.42.1 -- and you would go to 192.168.4
> 2.1:81 to access the back-end menu. One of the opt
> ions here is a "factory reset" which will restore
> all factory settings for your handibot.

Is there a way to get to that through a hardwired connection? I found some instructions online which called for pushing a button on the board, but pushing that button did not reset the card to factory defaults, as the wifi is still "hand-o-bot" and the password has been changed from the original.
Re: FabMo WiFi Name and Password reset
November 06, 2019 06:36PM
Send me a PM with you address—I’ll send you a fresh control card to exchange that will get you set up with the most recent factory settings
Sorry, only registered users may post in this forum.