Handibot for sale in NJ hardly used just about every option let me know thanks Bobby rasbldrs - Handibot Forum
I think I have it at 23 7/8", Don't know why my height is offby rasbldrs - Handibot Forum
I am having same issues with the dimming in about 30 sec. To align the cross hairs used a pliers softly.by rasbldrs - Handibot Forum
still working on it ,I am getting close at 23 5/8"by rasbldrs - Handibot Forum
Brian, Your pre marks are at 24" and you move from the yellow plate, you don't mark the board set the first mark at x=0, y=0 for tile 1 then move to your next mark at x=0, y=0 and so on. I have problems that I set up first mark x=0, y=0 then tile 2 move to my next mark which is 24" it does not line up if I am in the middle of a letter it is off. any suggestions.by rasbldrs - Handibot Forum
Brian Thank you for your help I did get a email from Andy and I am back up and running Thanks again Bobby rasbldrs - Handibot Forum
Downloaded trial and wants my makerspace ID. Where am I going wrong. Why did shopbot have to take the email link down? Still dead in the water Help Bobby rasbldrs - Handibot Forum
Thanks Wazza, I will try tonight, I was there already and saw where I can download a trial for ver 9 but nothing about shopbot version. wish me luck will let you know how I make out.... Bobby rasbldrs - Handibot Forum
Please Help. My computer crashed and need to install all software I have the email printed out that gave me the upgrade to Vcarve 9 but the link is no good any more. where can I find and install the software Thanks right now dead in the water email that they sent the update to is bob@sokoly.com Thanksby rasbldrs - Handibot Forum
When I push the red button on the handibot to stop the machine to adjust something I can not start it again. On the computer it says Quit or Resume you can not do either the computer is froze, only way to resume is to turn off the handibot and start over. Also when cutting yesterday I noticed a delay, I was using the arrows to move the router and would be a couple second delay more it would moby rasbldrs - Handibot Forum
As I said in another post Brian did update the app and in trying it worked great. I was cutting yesterday and it would go down and touch, lift up, and touch again and freeze up the machine. This went on and on. I manually set the Z and did some cutting. Before I shut the machine down thought I would give one last try and it worked. Why would it be so spotty? I thought we had it... Bobby rasbldrs - Handibot Forum
Thanks Brian I have installed the new Quick bit app and I have success. One question, at the end it says zeroed and cutter length saved quit or resume. What one do you pick and what is the difference?. Bob (a happy camper now.)by rasbldrs - Handibot Forum
what did you do to get Quick bit working. I don't have aspire. would be nice to have more than a 200. paper weightby rasbldrs - Handibot Forum
glad your up and running Wassa, and glad to hear we are working on quick bit appby rasbldrs - Handibot Forum
So this thing is only good for a door stop? for some one who knows programming can it be that hard? just frustrated here.by rasbldrs - Handibot Forum
Download link worked this morning, but same one that I have alreadyby rasbldrs - Handibot Forum
went to the above link to see if I have the latest download clicked on the down arrow and says download not available?by rasbldrs - Handibot Forum
So for now I am stuck until you find a software fix?by rasbldrs - Handibot Forum
#5 is off until pressure on quick bit puck, freezes as soon as touches puck with #5 litby rasbldrs - Handibot Forum
OK got it. I have attached 3 pictures first one machine on just 3 lit, 2nd picture me holding pressure on quick bit, 3rd when bit hits the puck and freezes I have no idea what do you think... Bobby rasbldrs - Handibot Forum
I don't have lights change when I push the red button. attached are the only lights I see be sides by the on off switch there are 2 green lights. I have no idea...by rasbldrs - Handibot Forum
Not sure what you mean by lit I do not see any lights by 5? Can not get it to do anything once it hits the quick bit puck...by rasbldrs - Handibot Forum
Went to use Handibot and quick bit freezes everything again. Once the bit hits the metal on the quick bit every freezes and the only way to get going is to turn everything off and restart. What's up how can we fix this...by rasbldrs - Handibot Forum
Update on Quick bit app. I updated to 1.6.1. and everything working now Thanks and Happy New Yearby rasbldrs - Handibot Forum
Thanks Brian, Downloaded new file deleted old one. Now when I push button 1.6.0 it stops hard on the quick bit and freezes as per picture it will not let you stop the only way I can reset is get out of fambo and turn off handibot. where do I go from here?by rasbldrs - Handibot Forum
I installed quick bit this morning and when I push the button the router does not stop it lifts the handibot up. Everything went well with install until it says you must install macro prior to first use push blue button that says install macro, I don't have a button that says that just two green buttons saying Measure Cutter Fabmo verison 1.5.2 and earlier, and Measure Fabmo version 1.6.0 aby rasbldrs - Handibot Forum
Merry Christmas and have a great new year everyone...by rasbldrs - Handibot Forum
I am still playing with one, when I am a little further I will post some pics. I would love to see what others have come up with... Bobby rasbldrs - Handibot Forum
Is there any way to make braille signs with the handibot ?by rasbldrs - Handibot Forum