Jake,
To control the rotary axis with FabMo--you'll just need to enable that extra axis. It's a quick setting update in the configuration window. Instructions are contained in the doc that I've attached to this post.
I personally use VCarve for all of my rotary work. Vectric has some tutorials on setting up "wrapped jobs" in VCarve--check out this link:[
www.vectric.eu]
Someone else may chime in with more helpful info on how to toolpath in Fusion--but I would also say that even if you create the model in fusion, you can export it as an .stl and toolpath it in VCarve.
Brian
Attachments:
open |
download -
Handibot 2 MANUAL Rotary Axis Setup.pdf
(2.07 MB)